Frame & Filter Assembly | Round Frame
 While the Round Frame and Filter Assembly is the cornerstone upon which Silt-Saver was built, after the Round Assembly was developed, it was determined that a Square base design would be better suited for use in DOT applications. It has an outside... |
Travel Lane Wattle High Visibility Green Weighted Sediment Log
 A sediment log of pine straw, wrapped with a High Visibility polyester green mesh fabric and weighted with internal sandbags. Attached handles allow for easy lifting and placement.
|
Construction Exit Mat
 A stone stabilized pad located at any point where traffic will be leaving a construction site to a public right-of-way, street, alley, sidewalk, parking area of any other area where there is a transition from bare soil to a paved surface. |
Frame & Filter Assembly | Square Frame
 The S-100A-DOT/S-100A-HF is our cornerstone product. It was created to address a specific need and has evolved into so much more. After the round device was developed, it was determined that a square base design was better suited for use in DOT... |
Replacement Filters | Department of Transportation Filter (D.O.T)
 DOT filters (Round or Square) are designed as a 2-stage filter with 12'' of maximum filtration material on lower half and maximum overflow capabilities in the upper half. This design addresses flooding issues while offering maximum efficiency in or... |
Replacement Filters | High Flow Filter
 High Flow filters (Round or Square) are designed for maximum flow. When combined with natural floatables in storm water, a moderate filter is created. Filter efficiency should be compared with #57 stone. This filter works well in high traffic areas... |
Curb Inlet Filter | High Flow Green
 The Curb Inlet Filter is a filter designed to be placed in front of a curb inlet or opening to prevent the migration of silt into the storm drain system. Silt-Saver products are built around a unique patented coil system that allows the free passage... |
Curb Inlet Filter | Curb and Grate Inlet Filter
 The C-800/SC Curb & Grate filter utilized heavy duty interconnected polymeric coil to support a highly effective non-woven polyester filter. This filter allows a higher flow than typical silt fence and maintains structural integrity, even during heavy... |
BSRF® | Belted Silt Retention Fence
 The Silt-Saver BSRF®, when installed correctly, produces a retention fence with superior filtering capabilities and proven strength.
The fabric used is a spunbond polyester material with a fiberglass scrim or net sandwiched in between the... |
BSRF® | BSRF-HD–Priority 1
 The BSRF® Priority 1 green band is a 36'' wide, non-woven spun-bond polyester fabric with an internal scrim. The system utilizes wood stakes and a specific method of attachment. (See Installation Specification) The BSRF, when installed as... |
Silt-Saver Priority 2 Silt Fence
 The fabric is a 36'' wide, non-woven spun-bond polyester fabric. The system utilizes wood stakes and a specific method of attachment. (See Installation Specifications) The fabric, when installed as specified, produces a proven system with superior... |
Flexible Inlet Protection for Pedestal Top Inlets
 Pedestal Inlet Filter – Protection for raised surface inlets.
Features belts and “D” rings for securing around the inlet device. This product has an internal grid for structural support and does not require stakes.
|
Bottom Drain Attachment
 The Bottom Drain Attachment is designed to work in conjunction with the
R-100A to create a self-contained filtration system.
Simple and quick to assemble, the BDA-500 provides a solution where self contained filtered drainage is a necessity. |
Dewatering/Pump Bag
 A high efficiency, high pressure bag featuring a neck with D-rings for securely attaching the hose. The neck opening allows for hoses up to six inches. |
Delineation Fence | Environmental Fence - Green
|
Delineation Fence | Safety Fence - Orange
|
