The Pedestal Inlet Wrap is a device to keep sediment, grass clippings and trash from entering pedestal top inlets and the storm drains below. This flexible layer of high flow mesh provides filtration without restricting the stormwater flow. It can be easily installed in minutes by wrapping the device around the round or square pedestal top inlet and securing with the belts and “D” ring attachments. The device is 22 inches tall and 17 feet long to accommodate most pedestal top inlets easily. It is durable, lightweight and reusable. Sourced and made in America.
The Pipe Stopper is a sediment control device designed to prevent sediment, trash and animals from entering horizontal stormwater pipes. This device reduces costs by preventing the buildup of sediment and the need for costly pipe clean-outs prior to final inspections. Each Pipe Stopper consists of a durable and reusable HDPE frame that clips into HDPE, concrete or corrugated plastic pipe for easy installation and removal. A custom designed filter cover fits over the frame much like a shower cap and is available in 2 filter options, the 2 Stage DOT Filter option offering greater sediment retention and a High Flow Filter option to accommodate greater water flow. Sourced and made in America. Sizes available to fit internal pipe diameter 12” / 15” / 18” / 24” / 30” / 36”.
The Under Grate Sediment Bag is designed to fit unobtrusively under a stormwater drain to collect sediment, trash and other floatables from entering the pipes and waterways. It is easily installed under the grate inside the catch basin and does not impede traffic above. It is made of 40 sieve woven polypropylene geotextile fabric to allow for water filtration and sediment retention. It has integrated stormwater overflow ports to prevent flooding during heavy rain events, and is UV resistant, durable and reusable. The one-piece design provides load bearing while the handles allow for easy installation, removal, cleaning, and replacement. It comes in a variety of sizes to fit standard grates. The high visibility green edging is easily seen by workers and inspectors to show that sediment protection is in place. An economical addition to your Best Management Practice (BMP), the Sediment Bag can reduce costly basin and pipe system cleaning.Under Grate Sediment Bag Comes in the Following Sizes:18"x36", 21"x29", 24"x24", 24"x36", 24"x48", 27"x27", 28"x36", 36"x36", 36"x48", and 40"x55"
The Under Grate City Bag is designed for festivals or street parties to fit unobtrusively under a storm water drain in a parking lot to collect trash and prevent other floatables from entering pipes, sumps, and waterways. It is easily installed under a parking lot grate inside the catch basin and does not impede traffic above. It is made of high flow 9 X 9 scrim mesh (clear water flow >1100 gpm/ft2) to prevent flooding in heavy rain events. The one-piece design provides load bearing while the integrated handles allow for easy installation and removal. Overflow ports are provided to prevent flooding. It is reusable and comes in a variety of sizes to fit standard grate sizes. The City Bag can reduce costly basin and pipe system cleaning.Under Grate City Bag Comes in the Following Sizes: 12"x48", 21"x29", 24"x24", 24"x48",27"x27", 28"x36", 36"x36", and 40"x55"Sourced and made in America.
Silt Saver Priority 1 Belted Silt Retention Fence (P-1™, BSRF™) is a reinforced silt fence with greater then 96% efficiency of sediment retention designed for heavy duty sensitive areas. It is a 36” tall, non-woven spun-bond polyester fabric with a fiberglass internal scrim for added support. The fence utilizes oak / hardwood wood stakes (13/4” X 1 ¼” X 48”) and a specific method of attachment (bonding strips) to enhance the strength of the system. The BSRF, when installed as specified, produces a proven system with superior filtering capabilities in slurry conditions. This fence is available as 48-foot pre-staked rolls with 4 foot spacing. Sourced and made in America.
Silt Saver Priority 2 Belted Silt Retention Fence (P-2, BSRF) is a nonwoven spun bound polyester fabric with greater than 96% efficiency of sediment retention for medium duty sensitive sites. The fence utilizes oak / hardwood wood stakes (1 1/8” X 1 1/8” X 48”) and a specific method of attachment (bonding strips) to enhance the strength of the system. The BSRF, when installed as specified, produces a proven system with superior filtering capabilities in slurry conditions. This fence is available as 48-foot pre-staked rolls with 6 foot spacing. Sourced and made in America.
NTPEP CompliantWoven Belted Silt Fence - Standard is an alternative to wire back silt fence that does not require wire and / or net backing. It is a nominal 30 sieve woven polypropylene geotextile created with five >350 lb. tensile strength belts woven into the fabric making this line of silt fence one of the strongest on the market. The internal belts used as attachment points allow this fabric to distribute the weight of stormwater and sediment throughout the system allowing the fence to hold maximum loads without additional support. The fence is 36” tall and available prestaked on 1 ¾” X 1 ¼” X 4’ hardwood posts or as master rolls for application on wood or steel posts. The prestaked fence is available on 4’ centers as 48 feet or 6’ centers as 100 feet, and is fan-folded for ease of installation. The enhanced structural integrity associated with this fence reduces costs associated with replacement and repairs. Sourced and made in America
NTPEP CompliantWoven Belted Silt Fence - 2 Stage is an alternative to wire back silt fence that does not require wire and / or net backing and was designed to address areas with the heaviest stormwater flow. It is a woven geotextile with four >350lb. tensile strength belts woven into the fabric making this line of silt fence one of the strongest on the market. The internal belts used as attachment points allow this fabric to distribute the weight of stormwater and sediment throughout the system allowing the fence to hold maximum loads without additional support. The 2 Stage WBSF was designed specifically to meet the challenge of those areas on your site with heavier than normal stormwater flow. Heavy stormwater flow often leads to silt fence failures by creating undermining below the fence or over topping above, both of which threaten structural integrity and sediment retention. This 2 Stage fence was engineered with both controlled stormwater release and sediment retention in mind. Stage One above the ground line is 50 sieve to retain sediment with superior efficiency, while Stage Two provides controlled stormwater release allowing greater than 300 gallons per minute per square foot stormwater flow. This controlled stormwater release along the length of the fence allows the water to be more evenly distributed across the fence reducing the risk of failure at the lowest point. 2 Stage WBSF is available on pre-assembled hardwood stakes (1 ¾” X 1 ¼” X 4’) at 4’ centers for heavy duty or 6’ centers for medium duty sensitive areas. It is also available as master rolls of 500 or 1000 feet for application on wood or steel posts. Sourced and made in America.
Come visit Silt Saver’s booth at our next event or sign-up for our upcoming webinars. Click here to view our events & webinars calendar.
Distributors
Our goal is to provide distributors who are well versed in our products and how they can best address your sediment control issues.
Please contact us so that we can provide you with a knowledgeable distributor near you.