NTPEP CompliantThe WBSF Combination Fence is WBSF 2 Stage Silt Fence with an additional delineation layer across the top. For use in areas with maximum stormwater flow that also require delineation this fence is another in the line of Silt Saver’s Woven Belted Silt Fences designed as alternatives to wire back silt fence that do not require wire and / or net backing. It is a woven geotextile with four >350lb. tensile strength belts woven into the fabric making this silt fence one of the strongest on the market. The internal belts used as attachment points allow this fabric to distribute the weight of stormwater and sediment throughout the system allowing the fence to hold maximum loads without additional support. The 2 Stage technology used in this fence allows it to meet the challenge of those areas on your site with heavier than normal stormwater flow. 2 Stage technology was designed to allow for enhanced sediment retention and stormwater release while maintaining the same WBSF structural integrity and strength. The first stage (lower 12 inches above ground level) is nominal 50 sieve woven fabric to facilitate the greatest sediment retention. The second stage (upper 12 inches) is nominal 20 sieve woven fabric providing controlled release of stormwater during heavy rain events reducing overtopping and undermining. Finally, the green high visibility band across the top of the fence provides additional delineation. Installing one fence to do two jobs can save time and money on your site. WBSF Combination fence is available on pre-assembled hardwood stakes (1 ¾” X 1 ¼” X 4’) at 4’ centers (designed for heavy duty) or 6’ centers (designed for medium duty) sensitive areas. It is also available as master rolls of 500 or 1000 feet for application on wood or steel posts. Sourced and made in America.
The Silt Saver High Visibility Delineation Fence is a barrier fence created with structural integrity in mind. It is made from woven high-density polyethylene (HDPE) creating a durable fabric and sustainable ultraviolet (UV) coloration and attached to sturdy 1 ¼" X 1 ¼" X 60” oak posts. Its unique method of attachment (sandwiching the fabric between the post and a bonding / lattice strip) allows the fence to withstand the pressures of nature and nearby construction. The fence is 4’ tall and available in 100’ lengths, pre-staked at 8’ centers. It is available in Orange (Caution / warning / danger) or Green (Water bodies and environmentally sensitive areas). This is a delineation fence that will actually stay in place reducing maintenance and replacement costs. Sourced and made in America.
The CHIP 10 is a weighted wattle designed for stormwater velocity dissipation and sediment retention in BMP applications such as slope stabilization and curb inlet protection. It is filled with biodegradable weed and seed free kiln dried wood chips providing an environmentally friendly alternative to recycled rubber / wire / silt fence. The kiln dried wood chips also allow this wattle to weigh less for shipping and installation (approximately 5 lbs./ft.) while more than doubling in weight (approximately 14.5lbs./ft.) when storm water is absorbed by the chips. The device is nominal 9 inch in diameter and 10 feet in length. Total dry weight is nominal 58lbs, while wet weight is nominal 145 lbs. The wattle has attached handles to accommodate easy placement and movement and the casing is provided as two durable sleeve options: Black woven polypropylene geotextile fabric or high visibility polypropylene green mesh fabric. The CHIP 10 provides an environmentally safe alternative to other heavy weight wattles on the market for sediment control. A waterproof protective shroud is provided over pallet purchases. Sourced and made in America.
The Compression Tube is a weighted wattle of nominal 5 foot length and 9 inch diameter allowing for enhanced handling and versatility in its use for stormwater velocity dissipation and sediment retention. It is filled with biodegradable weed and seed free kiln dried wood chips providing an environmentally friendly alternative to recycled rubber / wire / silt fence. The kiln dried wood chips allow this wattle to weigh less for shipping and installation (approximately 5 lbs./ft.) while more than doubling in weight (approximately 14.5lbs./ft.) when storm water is absorbed by the chips. The wattle has a durable woven polypropylene geotextile fabric with attached handles to accommodate easy placement and movement. It comes with 2 compression stakes to apply added downward pressure to prevent undermining. A waterproof protective shroud is provided over pallet purchases. Sourced and made in America.
Travel Lane Wattles are light weight, durable wattles designed for high flow stormwater filtration and easy movement. They are often used for stream protection, slope erosion control, and curb inlet protection. The durable polyester high visibility green mesh casing allows for high flow filtration and handles allow for easy installation and movement. The core filling is biodegradable pine straw preventing mold and compaction which can lead to ponding affects often associated with wheat straw wattles. Light weight, durable, reusable wattles that provide high flow filtration, flexibility, easy installation and maintenance. 9” in diameter and available in lengths 10’ / 15’ / 22’. Sourced and made in America.
The High Velocity Ditch Check is a replacement for rock or fabric check dams / ditch checks. It is designed as a temporary barrier to slow the velocity of concentrated stormwater and facilitate controlled release through the fabric onto the rear scour guard. It is easily installed and removed without heavy machinery, is durable, and requires minimal maintenance. It is a multi-component system with each piece contributing to the performance of the system. The system is designed to conform to the contour and width of ditch slopes preventing bypass and providing strength to withstand concentrated flow. This product is offered in two prefabricated sizes: HVDC-24 is 24 foot wide with a 24” overflow to accommodate flat bottom, trapezoidal ditches and the HVDC-14 is a 14 foot wide version with 16” overflow for “V shaped” ditches. The velocity restrictor sheet is made from green mesh that allows floatables to contribute to the filtration of stormwater and makes cleaning fast and simple. Pine chip filled compression tubes held in place with compression stakes prevent undermining. The attached front water seal and rear scour guard also prevent undermining and ditch scouring. It is preassembled and sold as a kit to ensure quality control and consistency of installation.The kit includes:- Velocity restrictor sheet prefabricated with posts
- Attached front water seal and rear scour guard
- Additional rear scour guard extension
- Compression tubes with compression stakes
The Low Velocity Ditch Check is designed to replace light weight fabric ditch checks and traditional wattles as a temporary barrier to slow the velocity of channel stormwater. It is a multicomponent system consisting of a durable woven geotextile sleeve filled with kiln dried pine chips with an underlying attached front water seal and rear scour guard to prevent undermining that can traditionally occur in this situation. Compression stakes and sod staples maintain the placement of this device. It is preassembled and sold as a kit to ensure quality control and consistency of installation.+++ Patent pending +++
The Dewatering Bag is a high efficiency, high pressure filtration pump bag designed to collect sediment from collected water in construction site dewatering applications and on pipelines. It prevents erosion while protecting surrounding streams, property, and storm sewers from sediment. It is made with a custom designed neck including D-ring tie straps to provide secure attachment to a variety of pump hose sizes up to 6 inches
Come visit Silt Saver’s booth at our next event or sign-up for our upcoming webinars. Click here to view our events & webinars calendar.
Distributors
Our goal is to provide distributors who are well versed in our products and how they can best address your sediment control issues.
Please contact us so that we can provide you with a knowledgeable distributor near you.